# The contents of this file are subject to the Interbase Public
# License Version 1.0 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy
# of the License at http://www.Inprise.com/IPL.html
#
# Software distributed under the License is distributed on an
# "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express
# or implied. See the License for the specific language governing
# rights and limitations under the License.
#
# The Original Code was created by Inprise Corporation
# and its predecessors. Portions created by Inprise Corporation are
# Copyright (C) Inprise Corporation.
#
# All Rights Reserved.
# Contributor(s): ______________________________________.
# -------------------------- makefile.msc ------------------------
#
# This makefile will build the examples supplied with InterBase 5.0.
# See the Programmer's Guide for information about the example
# databases and example programs.
#
# You MUST edit the IBASE definition in this file to point to the
# directory where InterBase was installed.  As well as the MSCDIR
# definition to point to the installations directory of your 
# Microsoft C/C++ Compiler. 
#
# To build all the examples use the 'all' target, by issuing the 
# following command:
#
#   	nmake -f makefile.msc all
#
# To build any one individual target, use the following command:
#
#  	nmake -f makefile.msc 'target'
#
# where target 'target' is one of the following:
# 	employe2.gdb, api1.exe, api2.exe, api3.exe, api4.exe, 
# 	api5.exe, api6.exe, api7.exe, api8.exe, api9.exe, 
# 	api9f.dll, api10.exe, api11.exe, api12.exe, api13.exe, 
# 	api14.exe, api15.exe, api16.exe, api16t.exe, apifull.exe, 
# 	dyn1.exe, dyn2.exe, dyn3.exe, dyn4.exe, dyn5.exe, 
# 	dynfull.exe, stat1.exe, stat2.exe, stat3.exe, stat4.exe, 
# 	stat5.exe, stat6.exe, stat7.exe, stat8.exe, stat9.exe, 
# 	stat10.exe, stat11.exe, stat12.exe, stat12t.exe, 
# 	udflib.dll
#
# ---------------------------------------------------------------------

# ---------------------------------------------------------------------
# InterBase Installation Directory
#
# CHANGE this definition to point to your InterBase installation directory
# ---------------------------------------------------------------------
IBASE=		d:\interbase

# ---------------------------------------------------------------------
# Microsoft C/C++ Installation Directory
#
# CHANGE this definition to point to your compiler's installation directory
# ---------------------------------------------------------------------
MSCDIR=		d:\DevStudio\VC

# ---------------------------------------------------------------------
# General InterBase Defines for Microsoft Windows 95/NT
# ---------------------------------------------------------------------
GPRE=		$(IBASE)\bin\gpre -c -n
GPRE_M=		$(IBASE)\bin\gpre -c -n -m
ISQL=		$(IBASE)\bin\isql
DB=		employee.gdb

# ---------------------------------------------------------------------
# General Compiler and linker Defines for Microsoft C/C++ 5.0
# ---------------------------------------------------------------------
CFLAGS=		-c -Zi -w -MD -DWIN32 $(INCLUDE)
LIB_CFLAGS=	$(CFLAGS) -LD
INCLUDE=	-I$(IBASE)\include -I$(MSCDIR)\include
LIBS=		$(MSCDIR)\lib\msvcrt.lib $(IBASE)\lib\gds32_ms.lib
CC=		$(MSCDIR)\bin\cl
LINK=		$(MSCDIR)\bin\link
LIBRARIAN=	$(MSCDIR)\bin\lib
COPY=		copy

# ---------------------------------------------------------------------
# Generic Compilation Rules 
#
# Do NOT change anything below this point.
# ---------------------------------------------------------------------
.SUFFIXES: .e .c .obj .exe

.e.c:
	$(GPRE) $< -d $(DB)

.c.obj:
	$(CC) $(CFLAGS) $< 

.obj.exe:
	$(LINK) -out:$@ $< $(LIBS)


# ---------------------------------------------------------------------
# Specific targets to build 
# ---------------------------------------------------------------------

cmt:
	@echo "--------------------------- makefile.msc ------------------------
	@echo "									 
	@echo " This makefile will build the InterBase 5.0 examples.
	@echo " See the Programmer's Guide for information about the example
	@echo " databases and example programs.	
	@echo "									
	@echo " You MUST edit the IBASE definition this file to point to the	
	@echo " directory where InterBase was installed.  As well as the MSCDIR 
	@echo " definition point to the installations directory of your 
	@echo " Microsoft C/C++ Compiler.					 
	@echo "									
	@echo " To build all the examples use the 'all' target, by issuing the 	
	@echo " following command:						
	@echo "									
	@echo " 	nmake -f makefile.msc all				
	@echo "									
	@echo " To build any one individual target, use the command:	
	@echo "									
	@echo " 	nmake -f makefile.msc 'target'				
	@echo "									
	@echo " where target 'target' is one of the following:			
	@echo "									
	@echo " 	employe2.gdb, api1.exe, api2.exe, api3.exe, api4.exe, 
	@echo " 	api5.exe, api6.exe, api7.exe, api8.exe, api9.exe, 
	@echo " 	api9f.dll, api10.exe, api11.exe, api12.exe, api13.exe, 
	@echo " 	api14.exe, api15.exe, api16.exe, api16t.exe, apifull.exe, 
	@echo " 	dyn1.exe, dyn2.exe, dyn3.exe, dyn4.exe, dyn5.exe, 
	@echo " 	dynfull.exe, stat1.exe, stat2.exe, stat3.exe, stat4.exe, 
	@echo " 	stat5.exe, stat6.exe, stat7.exe, stat8.exe, stat9.exe, 
	@echo " 	stat10.exe, stat11.exe, stat12.exe, stat12t.exe, 
	@echo " 	udflib.dll
	@echo " 								
	@echo "-----------------------------------------------------------------

all: employe2.gdb api1.exe api2.exe api3.exe \
     api4.exe api5.exe api6.exe api7.exe api8.exe \
     api9.exe api9f.dll api10.exe api11.exe api12.exe api13.exe \
     api14.exe api15.exe api16.exe api16t.exe \
     apifull.exe dyn1.exe dyn2.exe dyn3.exe dyn4.exe \
     dyn5.exe dynfull.exe stat1.exe stat2.exe stat3.exe \
     stat4.exe stat5.exe stat6.exe stat7.exe stat8.exe stat9.exe \
     stat10.exe stat11.exe stat12.exe stat12t.exe udflib.dll 

employe2.gdb: employe2.sql
	$(ISQL) -i $?

api9.obj: api9.c example.h api9f.sql
	$(CC) $(CFLAGS) api9.c $(LIBS)
	$(ISQL) employee.gdb -i api9f.sql

api9f.obj: api9f.c example.h
	$(CC) $(LIB_CFLAGS) $?

api9f.lib api9f.exp: api9f.obj api9f.def
	$(LIBRARIAN) api9f.obj -out:api9f.lib -def:api9f.def -machine:i386 \
	-subsystem:console

api9f.dll: api9f.lib api9f.exp api9f.obj
# build a small argument file and use it
	@echo -entry:_DllMainCRTStartup@12 > link.arg
	@echo -subsystem:console -DLL -DEBUG:FULL >> link.arg
	@echo -out:api9f.dll >> link.arg
	@echo api9f.exp api9f.obj $(LIBS) >> link.arg
	$(LINK) @link.arg
	@echo -----------------------------------------------------------
	@echo You need to copy api9f.dll to the interbase lib directory
	@echo in order for api9.exe to work correctly.
	@echo -----------------------------------------------------------

udflib.obj: udflib.c example.h
	$(CC) $(LIB_CFLAGS) udflib.c 

udflib.lib udflib.exp: udflib.obj udflib.def
	$(LIBRARIAN) udflib.obj -out:udflib.lib -def:udflib.def -machine:i386 \
	-subsystem:console

udflib.dll: udflib.lib udflib.obj udflib.exp
# build a small argument file and use it
	@echo -entry:_DllMainCRTStartup@12 > link.arg
	@echo -subsystem:console -DLL >> link.arg
	@echo -out:udflib.dll >> link.arg
	@echo udflib.obj udflib.exp $(LIBS) >> link.arg
	$(LINK) @link.arg
	@echo -----------------------------------------------------------
	@echo You need to copy udflib.dll to the interbase lib directory
	@echo in order for the server to load it. 
	@echo -----------------------------------------------------------