# The contents of this file are subject to the Interbase Public
# License Version 1.0 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy
# of the License at http://www.Inprise.com/IPL.html
#
# Software distributed under the License is distributed on an
# "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express
# or implied. See the License for the specific language governing
# rights and limitations under the License.
#
# The Original Code was created by Inprise Corporation
# and its predecessors. Portions created by Inprise Corporation are
# Copyright (C) Inprise Corporation.
#
# All Rights Reserved.
# Contributor(s): ______________________________________.
# ---------------------------------------------------------------------
# Generic Compilation Rules 
#
# Do NOT change anything below this point.
# ---------------------------------------------------------------------
.SUFFIXES: .o .c .e

.e.c: 
	$(GPRE) $< -d $(DB)

.c.o:
	$(CC) $< $(CFLAGS) $@

.o:
	$(LINK) -o $@ $< $(LINK_FLAGS)

# ---------------------------------------------------------------------
# Specific targets to build 
# ---------------------------------------------------------------------

cmt:
	@echo "--------------------------- makefile ----------------------------"
	@echo "									" 
	@echo " This makefile will build the InterBase 5.0 examples.		"
	@echo " See the Programmer's Guide for information about the example	"
	@echo " databases and example programs.					"
	@echo "									"
	@echo " You can edit the IBASE definition in this file to point to the	"
	@echo " directory where InterBase was installed. Or you can specify the "
	@echo " defenition on the command-line of make.				"
	@echo "									"
	@echo " To build all the examples use the 'all' target, by issuing the 	"
	@echo " following command:						"
	@echo "									"
	@echo " 	make all						"
	@echo " or								"
	@echo " 	make IBASE=/usr/interbase all				"
	@echo "									"
	@echo " To build any one individual target, use the command:		"
	@echo "									"
	@echo " 	make 'target'						"
	@echo " or								"
	@echo " 	make IBASE=/usr/interbase 'target'			"
	@echo "									"
	@echo " where 'target' is one of the following:				"
	@echo "									"
	@echo " 	employe2.gdb, api1, api2, api3, api4, api5, api6, api7, "
	@echo " 	api8, api9, api9f, api10, api11, api12, api13, api14, 	"
	@echo " 	api15, api16, api16t, apifull, dyn1, dyn2, dyn3, dyn4, 	"
	@echo " 	dyn5, dynfull, stat1, stat2, stat3, stat4, stat5,	"
	@echo " 	stat6, stat7, stat8, stat9, stat10, stat11, stat12, 	"
	@echo " 	stat12t, udflib						"
	@echo " 								"
	@echo "-----------------------------------------------------------------"

all:	employe2.gdb api1 api2 api3 api4 api5 api6 api7 \
	api8 api9 api10 api11 api12 api13 api14 api15 \
	api16 api16t apifull dyn1 dyn2 dyn3 dyn4 \
	dyn5 dynfull stat1 stat2 stat3 stat4 stat5 \
	stat6 stat7 stat8 stat9 stat10 stat11 stat12 \
	stat12t udflib api9f

employe2.gdb: employe2.sql
	$(ISQL) -i employe2.sql

api1.o:	api1.c example.h

api2.o: api2.c example.h

api3.o: api3.c example.h

api4.o: api4.c example.h

api5.o: api5.c example.h

api6.o: api6.c example.h

api7.o: api7.c example.h

api8.o: api8.c example.h

api9.o: api9.c example.h

api9:	api9.o api9f.sql
	$(LINK) $@.o -o $@ $(LINK_FLAGS)
	$(ISQL) $(DB) -i api9f.sql

api9f.o:api9f.c example.h
	$(CC) $< $(LIB_CFLAGS) $@

api9f:	api9f.o
	$(LIB_LINK) $@.o -o $@ $(LIB_LINK_FLAGS)
	@echo ------------------------------------------------------
	@echo You need to copy api9f to the interbase lib directory
	@echo in order for api9 to work correctly.
	@echo ------------------------------------------------------

udflib.o:udflib.c example.h
	$(CC) $< $(LIB_CFLAGS) $@

udflib: udflib.o
	$(LIB_LINK) $@.o -o $@ $(LIB_LINK_FLAGS)
	@echo ------------------------------------------------------
	@echo You need to copy udflib to the interbase lib directory
	@echo in order for the server to load it. 
	@echo ------------------------------------------------------

api10.o: api10.c example.h

api11.o: api11.c example.h

api12.o: api12.c example.h

api13.o: api13.c example.h

api14.c:api14.e 
	$(GPRE_M) $< -d $(DB)

api14.o: api14.c example.h

api15.o: api15.c example.h

api16.o: api16.c example.h

api16t.o: api16t.c example.h

apifull.o: apifull.c example.h align.h

stat1.c:stat1.e 

stat1.o:stat1.c example.h

stat2.c:stat2.e 

stat2.o:stat2.c example.h

stat3.c:stat3.e 

stat3.o:stat3.c example.h

stat4.c:stat4.e 

stat4.o:stat4.c example.h

stat5.c:stat5.e 

stat5.o:stat5.c example.h

stat6.c:stat6.e 

stat6.o:stat6.c example.h

stat7.c:stat7.e 

stat7.o:stat7.c example.h

stat8.c:stat8.e 

stat8.o:stat8.c example.h

stat9.c:stat9.e 

stat9.o:stat9.c example.h

stat10.c:stat10.e 
	$(GPRE_M) $<

stat10.o:stat10.c example.h

stat11.c:stat11.e 
	$(GPRE_M) $<

stat11.o:stat11.c example.h

stat12.c:stat12.e 
	$(GPRE_M) $<

stat12.o:stat12.c example.h

stat12t.c:stat12t.e 
	$(GPRE_M) $<

stat12t.o:stat12t.c example.h

dyn1.c:	dyn1.e 
	$(GPRE_M) $<

dyn1.o:	dyn1.c example.h

dyn2.c:	dyn2.e 
	$(GPRE_M) $<

dyn2.o:	dyn2.c example.h

dyn3.c:	dyn3.e 
	$(GPRE_M) $<

dyn3.o:	dyn3.c example.h

dyn4.c:	dyn4.e 
	$(GPRE_M) $<

dyn4.o:	dyn4.c example.h

dyn5.c:	dyn5.e 
	$(GPRE_M) $<

dyn5.o:	dyn5.c example.h

dynfull.c:dynfull.e 
	$(GPRE_M) $<

dynfull.o:dynfull.c example.h align.h